Process of Laminated Safety Glass

Step 1: The glass sheets to be laminated should be clean and free of dust particles.

Step 2: Take first glass sheet and apply the double sided tape on all four sides.

Step 3: Place the second glass sheet on the first taped sheet. Place the second sheet at a small angle. This will enable the resin to be poured in between the two sheets to flow easily.

Step 4: Take a calculated quantity of resin & mix the other two components in it. Using a flat funnel pour the mixed resin between the two sheets of glass.

Step 5: Remove the funnel and seal the opening.

Step 6: Level the sheets and allow it to cure. The curing time shall vary as per the thickness of lamination and the size of the panel.

About us

ADLAM is manufactured by Morex Industries Pvt. Ltd. Morex manufactures speciality resins for a wide range of applications... More...

Benefits of Laminated Safety Glass

It lowers the risk of Injury due to splintering and resists bullet penetration. Glass retains... More...

Consultation and Training

ADLAM provides training for making laminated safety glass using cold cure process... More...

process

Step 1 : The glass sheets to be laminated should be clean and free of dust particles. Step 2..step 3... More...

Get in touch

Name

Email Address

Subject